Motors & Actuators & Drivers – Three Hands Store https://store.3hands.me My WordPress Blog Fri, 19 Jul 2024 14:42:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.2 Bipolar Stepper Motor with Planet Gear Box (18kg.cm) https://store.3hands.me/product/bipolar-stepper-motor-with-planet-gear-box-18kg-cm/ https://store.3hands.me/product/bipolar-stepper-motor-with-planet-gear-box-18kg-cm/#respond Fri, 19 Jul 2024 14:39:40 +0000 https://store.3hands.me/?post_type=product&p=27992

Introduction

This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.0 A at 3.4 V, allowing for a holding torque of 18kg-cm (176N-cm) (200rpm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the Dual Bipolar Stepper Motor Shield for Arduino (DRV8825).

 

Notice: please carefully confirm techical details (torque, dimension, mounting, etc) for your project(s) before purchasing.

 DIY Alarm using Home Assistant, Konnected, and Sonoff RF Bridge

Hardwares you needed:

TB6600 Stepper Motor Driver

Bipolar Stepper Motor Project 1: How to Make A Terrifying Halloween Gadget

This is a simple but fun application for Halloween. All you need is a mask, a stepper motor, a micro-controller, a motor driver, a MP3 module and some wires as well as batteries. 

Hardware components:

DFRduino UNO R3 – Arduino Compatible

TMC260 Stepper Motor Driver Shield For Arduino

Bipolar Stepper Motor with Planet Gear Box (18kg.cm)

DFPlayer – A Mini MP3 Player For Arduino

Gravity: Digital PIR (Motion) Sensor For Arduino

Applications

  • Printer
  • 3D Printer
  • CNC
  • Robotics
  • Linear Actuators

Specification

  • Model No: 42BYGH40-18-22A-C5.18
  • Step Angle (degrees) :1.8
  • 2 Phase
  • Voltage: 3.4V
  • Current: 1.0A
  • Resistance: 1.7±10% Ohm/Phase
  • Inductance: 4.3±20% mH/Phase
  • Holding Torque: 3600 g.cm
  • Detent Torque: 400 g.cm
  • Insulation Class: B
  • Life: 6000 hours
  • Gear Ratio: 5.18:1
  • Hold Torque with Gearbox: 18kg·cm (176N·cm) (200rpm)
  • Dimension: 42×42×40mm(1.65×1.65×1.57″)
  • Mounting: 4 x M3

Documents

Shipping List

  • Stepper Motor with Planet Gear Box ×1

,

[[r.text]]
]]> https://store.3hands.me/product/bipolar-stepper-motor-with-planet-gear-box-18kg-cm/feed/ 0 Gravity: Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) https://store.3hands.me/product/gravity-dual-bipolar-stepper-motor-shield-for-arduino-drv8825/ https://store.3hands.me/product/gravity-dual-bipolar-stepper-motor-shield-for-arduino-drv8825/#respond Fri, 19 Jul 2024 14:39:13 +0000 https://store.3hands.me/?post_type=product&p=27956

Introduction

Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain……? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins. This board is compatible with the Arduino UNO R3. This shield directly supports Xbee and Xbee form factor Wi-Fi, Bluetooth and RF modules and is easy to connect cables via screwless PC terminals. Each stepper motor has a code switch for adjusting driving modes to obtain different rotational speeds. Interfaces of the board include extension 6 channel Analog I/O, 8 channel Digital I/O & I2C.

Version Upgrade:
1.V2 replaces DRV8825 as stepper motor driver, higher micro stepping (1/32)
2.Increase 3.3/5V input signal switch, compatible with 3.3V microcontroller
3.Expand the driver Enable pins, support sleep mode

JavaScript display

Specification

  • Input Voltage: 8.2-45 VDC
  • Output current: 1.6 A (Limited)
  • Working voltage: 3.3/5 V
  • Driving pin: D4, D5, D6, D7, D8, D12
  • Microstep resolutions: full, 1/2, 1/4, 1, 8, 1/16, 1/32
  • Support Dual Bipolar Stepper Motor
  • Support XBee interface
  • Compatible with the Arduino UNO R3, Leonardo, Mega microcontroller
  • Dimension: 83 * 55 * 25 mm/3.26 * 2.16 * 0.98 inches
  • Weight: 48 g

Documents

Shipping List

  • SDual Bipolar Stepper Motor Shield for Arduino (DRV8825) x1

  

,

[[r.text]]
]]> https://store.3hands.me/product/gravity-dual-bipolar-stepper-motor-shield-for-arduino-drv8825/feed/ 0 TT Geared Motor with Back Shaft (160rpm 6v L Shape) https://store.3hands.me/product/tt-geared-motor-with-back-shaft-160rpm-6v-l-shape/ https://store.3hands.me/product/tt-geared-motor-with-back-shaft-160rpm-6v-l-shape/#respond Fri, 19 Jul 2024 14:38:27 +0000 https://store.3hands.me/?post_type=product&p=27885

Introduction

This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts.  It is designed to easily incorporate the DFRobot Encoder. These motors are inexpensive, small, easy to install, and ideally suited for use in a mobile robot. The DFRobot ROMEO microcontroller is able to complete the closed-loop PID making use of the Gravity:TT Motor Encoders Kit.

We recommend this rubber wheel for this motor.

Specification

Electrical Characteristics:
  • Operating Voltage Range: 3~7.5V
  • Rated Voltage: 6V
  • Max. No-load Current(3V): 140 mA
  • Max. No-load Current(6V): 170 mA
  • No-load Speed(3V): 90 rpm
  • No-load Speed(6V): 160 rpm
  • Max. Output Torque: 0.8 kgf.cm
  • Max. Stall Current: 2.8 A
Operating Conditions:
  • Rated Load: 0.2  kgf.cm
  • Operating Temperature: -10~+60 ℃
  • Storage Temperature: -30~+85 ℃
  • Motor Type: 130
Mechanical Characteristics:
  • Output Mode: 2 sides
  • Gear Ratio: 1:120
  • Max. Diameter of Output Axle: 5.4 mm
  • Net Weight: 45 g

Documents

Shipping List

  • Micro DC Geared Motor with Back Shaft   x1

,

[[r.text]]
]]> https://store.3hands.me/product/tt-geared-motor-with-back-shaft-160rpm-6v-l-shape/feed/ 0